Also available a connected on line version, which as well as energy saving indicates in real time the presence of guests or staff in a room, logging the information directly into the hotel PC. When a guest enters the room and inserts their card into the ESD it switches on all electrical equipment. When staffs enter the room for cleaning or maintenance, the ESD recognizes their staff card and switches on only the electrical equipment they need to accomplish their work. The TV, air conditioning and mini bar are switched off or locked – saving energy.
Energy saving device (made by salto systems) is typically fitted with our access control Locks in medium to large hotels, and will only operate with a valid room card.
So no more using business cards and credit cards to leave the room lights or air conditioning on whilst nobody is present in the room.
- 2 different finishes for different room styles.
- Available with 1 or 2 relay outputs.
- With window detector input.
- If window is left open, the system will switch off the air conditioning.
- Flexible exit time delay by software.
- Modern Blue LED indicator which indicates the location of the device in the dark,and blinks as a courtesy indicator after retrieving the card when leaving the room.
- Available in iButton, smart card and RFID (Radio Frequency Identification) in (Mifare, Desfire, Vicinity). On line version available in contact smart card and RFID models.
- Input voltage: 120Volts AC+-15% or 220 Volts AC +-15%
- Consumption: 1watts in rest mode, 1.5 watts when activated
- Number of relays: 1 or 2
- Relays power cut: 2A, 220volts.
- Max.section for power and relays contacts connector: Stranded wire section: 12 AWG (2,5mm2). Strip length: 4-5mm.
- Max section for windows detector connector: Stranded wire section:16 AWG (0,5mm2).
- Strip length: 4-5mm.
- Connected version: Serial connected by bus RS485. Last ESD of the series must be
- connected to a Salto ON LINE control Unit (CU50EN or CU50ENSVN)
- Max. Number of ESD connected per CU: 40
