Product Description This unique patented device achieves electricity cost savings of up to 15%¹ by identifying the optimum voltage needed to efficiently run any fluorescent, filament based lighting. Simultaneously prolongs devices and components lifecycle by up to 25%² thus resulting in reduced carbon footprint.
Background:
The mains voltage supply from your supplier varies enormously subject to changes in power usage by other consumers, grid power losses, weather and atmospheric conditions. Variations in mains supply above your lighting rated voltage causes costly problems. The majority of lighting systems operate at maximum efficiency at 230 Volts in Europe and 110/120V in USA, Canada and Japan. An increase in voltage supply of as little as 4.3% to 240V in Europe creates; higher power usage (up to 13% more power), shortens lighting systems life cycle and increases CO2 emissions. Stopping over-voltage supply is critical in reducing: cost to the consumer; power generation and CO2 emissions.
Benefits:
The LiteSava combines a number of advanced technologies with a unique intelligent chip and program to identify the optimum voltage and power needed to run lighting and fan equipment, resulting in:
1. Cheaper electricity by disposing of the wasted power.
2. Increased equipment life cycle by decreasing the overworked lighting.
causedby higher voltage.
3. A reduction in CO2 emissions and therefore in overall carbon footprint
Specifications:
Voltage: 200V - 250V~, 50Hz.
Maximum Amps: 13 Amps.
Maximum Load: 2.5KW - Fluorescent lightings only - 3.0KW for all others
Power Consumption: ≤1 Watt on standby - 100 Watts at maximum load.
Site: Covered dry environment.
Use: Fluorescent (traditional & electronic ballast), tungsten, halogen,
filament lights.
Operational Range: - 10 to 60º C, 10% to 95% humidity.
Mains Switch: 13 Amps
Wiring: Direct to RCB in consumer or distribution board, up to 4.0 mm
twin and earth.
Fixing: 3 point with 3.5mm x 30 mm screws supplied.
Footprint (Approximately): 188mm(L)x108mm(W)x77.5mm(H)
Weight (Approximately): 600 grams
The LiteSava does not work with: Metal Halide (MH) or High Intensity Discharge (HID); CDMT or CHA Systems; High Frequency Ballasts.
