360°Ceiling Mount Fixture Motion Sensor

| Posted by House of Energy Saving Devices



Typical Application
  • Restroom with Stalls
  • Classrooms (Multiple Sensors)
  • Storage Rooms with Shelving
  • Concrete/Drywall Ceilings

Best choice for small motion (e.g. hand movements) detection

  • Viewing angle of 56º in a 360º conical shaped pattern
  • Provides 12 ft radial coverage when mounted to standard 9 ft ceiling
  • 8 to 15 ft mounting heights provide 10 to 20 ft radial coverage
  • Microphonics™ detects normal human activity up to 20 feet, but will detect greater distances in spaces with hard floors or very quiet rooms with little or no background noise

Specification:

Physical Specs

Size: 3 5/8" x 3 5/8" x 1 1/2" Deep (9.2 cm x 9.2 cm x 3.8 cm Deep)

Color: White

Mounting: Extended chase nipple fits 1/2 in. knockout in fixture or junction box

Environmental Specs

Relative Humidity: 20 to 90% non-condensing

Operating Temp: 14º to 160º F (-10° to 71° C)

Storage Temp: -14º to 160º F (-26° to 71° C)

Electrical Specs

Load Rating (1 Phase Only): 800 W @ 120 VAC, 1200 W @ 277 VAC, 1500 W @ 347 VAC

Motor Load: 1/4 HP

Frequency: 50/60 Hz (Timers are 1.2 times for 50 Hz)

Features:

  • Patented Dual Technology with PIR / Microphonics Detection
  • Self-Contained Relay - No Power Pack needed
  • Time Delay: 30 sec. to 20 minutes
  • No Minimum Load Requirements
  • Push-Button Programmable
  • Green LED indicator
  • 100 Hr. Lamp Burn-in Timer Mode

Sensors with Passive Dual Technology (PDT) first “See” motion using Passive Infrared (PIR) and then engage Microphonics™ to “Hear” sounds that indicate continued occupancy. This patented technology uses Automatic Gain Control (AGC) to dynamically self adapt a sensor to its environment by filtering out constant background noise and detecting only noises typical of human activity. When occupancy is detected, a self-contained relay switches the lighting “On. The sensor is line powered and can switch line voltage (see specifications). An internal timer, factory set at 10 minutes, keeps the lights “On” during brief periods of no activity. This timer is push-button programmable from 30 seconds to 20 minutes, and is reset every time occupancy is re-detected. If needed, a 10 second grace period also allows the lights to be voice reactivated after shutting off.