Energy Convervation

Unplug those unused electronics and save energy and money!

Vampire Energy

Even when household appliances are turned off, most are still using some electricity. Appliances are either in passive standby mode (the clock on the microwave is still ticking) or active standby mode (the VCR is off, but programmed to record something).

These numbers are for average standby modes, showing how much electricity is sucked out annually, in kilowatt hours, and what it cost you assuming 11cents per kilowatt hour, Red lines show passive standby mode and Blue lines show active standby mode

Let's Save Energy!!!

let's save energy

Set the air-con at 25 degree

Set our air-con thermostat at 25 degree or higher. Every degree raised saves our bills about $25 a year!

Standby power

Standby power can account for up to 10 percent of our electrical bill! We need to switch off at the source! Conserve Engergy, Save Money!

Pathway Lights

Motion-Sensor Step Light can be mounted outside or inside. Perfect for lighting stairs, hallways, decks, patios, or to act as a night light for children.

Features:

• Automatic turn off
• Glows automatically in the dark
• LED Wireless Step Light
• Motion sensor Activates light
• Weatherproof for indoor/outdoor use
• Bright white LEDs

Efergy Energy Reading Meter

Specifications:

• Frequency: 433.52MHz
• Transmission Time: 6s, 12s or 18s
• Transmission Range: 40m-70m
• Sensor Voltage Range: 110V-300V
• Measuring current: 50mA-95A
• Memory: 64K

The box contains:

1 x Efergy Sensor

1x Transmitter

1 x Elite Display Unit

2 x Velcro Fixing Pads

Efergy tells you every few seconds how much power you are consuming, how much money this is costing you and an estimate of your personal contribution to climate change. If you turn a set of lights ON or OFF, you can see INSTANTLY the change this has to your energy use. Once you have this information to hand means you, your family, or business, can visually see the benefits of saving energy.

The data is stored daily in an easy to access CPU memory so you can actually see the effects of your changing energy habits. Comparing day-to-day usage gives you direct feedback of how daily changes of habit toward energy use can have an effect on costs and estimates the personal contribution to the climate change in terms of carbon emissions. You can store data for 7 days, 4 weeks or 24 months.

Motion Sensing Night Light

Features:

•	Polarized plug
•	Uses 4-Watt clear type C-7 replacement bulbs
•	Bulb is fully encoded for added safety
•	Indoor use only
•	Light turns off 60 seconds after last detected movement

Product Description

This motion sensing night light turns On automatically when motion is detected. The night light includes a safety back so the lamp cannot be touched during operation. The light will turn Off 60 seconds after the last detected movement and will not turn On

Energy Saving Device - LiteSava

Product Description

This unique patented device achieves electricity cost savings of up to 15%¹ by identifying the optimum voltage needed to efficiently run any fluorescent, filament based lighting. Simultaneously prolongs devices and components lifecycle by up to 25%² thus resulting in reduced carbon footprint.

Background:

The mains voltage supply from your supplier varies enormously subject to changes in power usage by other consumers, grid power losses, weather and atmospheric conditions. Variations in mains supply above your lighting rated voltage causes costly problems. The majority of lighting systems operate at maximum efficiency at 230 Volts in Europe and 110/120V in USA, Canada and Japan. An increase in voltage supply of as little as 4.3% to 240V in Europe creates; higher power usage (up to 13% more power), shortens lighting systems life cycle and increases CO2 emissions. Stopping over-voltage supply is critical in reducing: cost to the consumer; power generation and CO2 emissions.

Benefits:

The LiteSava combines a number of advanced technologies with a unique intelligent chip and program to identify the optimum voltage and power needed to run lighting and fan equipment, resulting in:
1. Cheaper electricity by disposing of the wasted power.
2. Increased equipment life cycle by decreasing the overworked lighting.

causedby higher voltage.
3. A reduction in CO2 emissions and therefore in overall carbon footprint

Specifications:
Voltage: 200V - 250V~, 50Hz.
Maximum Amps: 13 Amps.
Maximum Load: 2.5KW - Fluorescent lightings only - 3.0KW for all others
Power Consumption: ≤1 Watt on standby - 100 Watts at maximum load.
Site: Covered dry environment.
Use: Fluorescent (traditional & electronic ballast), tungsten, halogen,

filament lights.
Operational Range: - 10 to 60º C, 10% to 95% humidity.
Mains Switch: 13 Amps
Wiring: Direct to RCB in consumer or distribution board, up to 4.0 mm

twin and earth.
Fixing: 3 point with 3.5mm x 30 mm screws supplied.
Footprint (Approximately): 188mm(L)x108mm(W)x77.5mm(H)
Weight (Approximately): 600 grams

The LiteSava does not work with: Metal Halide (MH) or High Intensity Discharge (HID); CDMT or CHA Systems; High Frequency Ballasts.